Concrete resurfacing · Albuquerque, NM
Concrete Resurfacing for Worn Albuquerque Driveways and Patios
Solid concrete that only looks worn gets a new top layer, not a tear-out. We clean, grind, repair and seal a fresh overlay on slabs across Albuquerque.
No obligation. We answer the phone or call back the same working day.
Resurfacing, explained
Concrete Resurfacing in Albuquerque
Concrete resurfacing bonds a durable new top layer, an "overlay", to concrete that is structurally sound but worn, instead of replacing the slab. You may hear it called a skim coat or a new top layer; it is the same job.
It suits concrete that is solid underneath but looks old on top: faded, rough, pitted or patched. The slab you have stays where it is, so there is no breaking out, no hauling away and no new pour.
Here is what resurfacing gives a worn slab:
- A new wearing surface. The overlay bonds to the old concrete and becomes the surface you walk and drive on.
- Prep matched to your slab. The cleaning, grinding and repair, and the overlay itself, are chosen for the condition and use of the concrete.
- Far less than replacement. Repairing and resurfacing concrete costs far less than tearing it out and pouring new.
What we resurface
Driveways, Patios and Commercial Floors We Resurface
We resurface driveways, patios, walkways, pool decks, garage floors and commercial spaces at homes and businesses. If the slab is sound, the surface on top can be renewed.
These are the surfaces we resurface most:
Driveways
A driveway that is solid but faded, pitted or patched gets one even surface again, without a tear-out.
Patios
A back patio that has weathered in the sun gets a fresh top layer from edge to edge.
Walkways
Front walks and side paths take the same overlay, so the way to the door looks new again.
Pool decks
A worn pool deck can take a heat-reducing, slip-resistant "Kool Deck" style overlay.
Garage floors
A stained, worn garage slab is ground and repaired so a new surface bonds to it.
Commercial spaces
Storefront walks, shop floors and other business slabs that are sound but tired.
How a job goes
How We Repair and Resurface Concrete
We clean and grind the surface, repair cracks and remove loose coatings, then apply the overlay and seal it. Most of the work is the prep, because that is what the new layer holds on to.
A resurfacing job runs in this order, start to finish.
- Clean
We clean the slab so dirt, oil and old residue are off the surface the overlay has to grip.
- Grind
We grind where it is needed, what the trade calls "diamond grinding", to open the surface and strip loose coatings and failing sealer.
- Repair cracks
Minor cracks and damaged spots are repaired first, so the new layer goes down on a sound, even base.
- Overlay
We apply the overlay, a thin new top layer bonded to the old slab and matched to how the concrete is used.
- Seal
A fresh coat of sealer goes on last to finish and protect the new surface.
What it costs
Concrete Resurfacing Prices
Resurfacing costs far less than tearing out and replacing concrete, and the area and its condition set the price. Basic concrete resurfacing in Albuquerque typically runs $2 to $2.50 per square foot.
What moves the number on your slab:
- The size of the area. A walkway and a full driveway are different jobs.
- Its condition and the prep. Cracks to repair, grinding and old coatings to strip all add work.
- The finish you choose. A plain broom finish and a decorative or pool deck coating are priced differently.
$2–$2.50 /sq ft
For basic concrete resurfacing, before your slab's prep and finish.
The exact price comes from a free look at your concrete. We quote the whole job before we start, with no surprise charges after.
Call for a Free EstimateFree and no obligation
Is your slab a fit
Signs Your Driveway Is Ready to Resurface
Cracks, holes and a worn finish on a slab that has not shifted are the signs that resurfacing fits. The slab underneath is sound; only the surface has given out.
These are the signs a slab suits resurfacing:
- CracksMinor cracks are repaired first, then covered by the new layer.
- HolesPits, holes and chipped spots are patched before the overlay.
- Worn finishA faded, rough or stained top on concrete that is still solid.
- Spalling"Spalling" is the flaking, pitted surface older concrete gets.
When Resurfacing Is Not Enough
Major structural damage, or a slab that keeps moving, may need removal and replacement rather than a new top layer. Major settling, wide cracking in many places, or sections breaking apart all point to replacement.
An overlay bonds to the slab under it, so it cannot hold together concrete that is breaking up or still shifting. If that sounds like yours, tell us on the call and we will look at it with you.
Reviews
What a Neighbor Said
A review from our Google profile, in the customer's own words.
Service was excellent.Great quality concrete.Locally owned and located in Bernalillo NM. Fast and friendly service.Very satisfied with the whole service team.Thank you !!!
FAQ
Resurfacing Answers
The questions we hear most about resurfacing. If yours is not here, call and ask.
Call for a Free EstimateResurfacing Across the Albuquerque Area
We resurface concrete across Albuquerque, New Mexico, and the nearby towns on our service area page.
That footprint is our commitment; a job outside it is a question for the call.
Albuquerque service areaDoes concrete resurfacing really work?
It does on the right slab. Resurfacing suits concrete that is structurally sound but looks old and worn, and the prep and overlay are matched to the slab's condition and use. Major structural damage or a slab that keeps moving is a job for removal and replacement instead.
How much does it cost to resurface concrete?
Basic concrete resurfacing in Albuquerque typically runs $2 to $2.50 per square foot. The size of the area, its condition and the prep it needs set the final number, and it costs far less than tearing out and replacing the slab.
Can existing concrete be resurfaced?
Yes, as long as the slab is sound. Driveways, patios, walkways, pool decks, garage floors and commercial spaces can all take a new overlay, and minor cracks are repaired before it goes on. Major settling, wide cracking in many places or sections breaking apart point to replacement.
Can I do concrete resurfacing myself?
Most of the job is prep: cleaning, grinding where needed, repairing cracks and removing loose coatings before the overlay and sealer go on. If you would rather hand it off, the estimate is free.
Give that worn slab a new surface.
Free, no-obligation estimates on concrete resurfacing across Albuquerque.
We quote the whole job before we start, with no surprise charges after.
Call for a Free EstimateMon to Fri, early morning to mid-afternoon
We show up when we say we will, and we clean up when the work is done.