Monday to Friday 7 am to 4 pm Albuquerque, NM and the valley
Free estimates (505) 520-1760

Pool decks · Albuquerque, NM

Pool Deck Resurfacing and Cool Deck Coatings in Albuquerque

A cracked, hot or slick pool deck, repaired and recoated. We fix the cracks and the loose coating, then lay a new cool deck coating that stays cooler underfoot and grips when wet.

Free, no-obligation estimates. We answer or call back the same working day.

Cool deck coating Pool deck resurfacing in Albuquerque: a worker knocking down a freshly sprayed cool deck texture with a trowel at the edge of a backyard pool

What it is

Pool Deck Resurfacing in Albuquerque

Pool deck resurfacing repairs the cracks in a concrete pool deck and covers it with a new coating that stays cooler underfoot and grips when wet. The slab stays where it is; the surface you walk on is new.

The coating people usually mean when they say cool deck is "Kool Deck", a polymer cement overlay made for pool decks that reduces surface heat and adds slip resistance. Resurfacing suits driveways, patios and garage floors too, but a pool deck is where bare feet meet hot sun and splashed water, so a top layer that stays cooler and grips is the whole point.

Finished cool deck pool deck resurfacing with cool deck coating in Albuquerque

Cool Deck and Overlay Coatings for Home and Commercial Pools

We apply two kinds of finish to residential and commercial pool decks: cool deck polymer cement coatings and decorative overlays.

These are the pool deck coatings we apply, starting with the one we suggest first.

  • Where we start

    Cool deck coating

    The textured finish we suggest right at the water's edge, where feet are bare and wet. It also costs less per square foot than a stamped overlay.

    Kool Deck · polymer cement
  • Stamped overlay

    A decorative overlay pressed with a pattern over the old slab, for a deck where the look comes first.

    Decorative
  • Overlay

    A thin new layer bonded over sound but worn concrete, for a deck that is solid underneath and only tired on top.

    New top layer
  • Sealer

    What looks like peeling color on a decorative deck is usually old sealer, which we strip and reseal. Fresh sealer can be slick when wet, so we keep it off the walking surface at the water's edge.

    Protective coat

How a job goes

How a Pool Deck Is Repaired and Recoated

We clean and prepare the deck, repair the cracks and loose coating, then apply the new coating, and a cool deck coating takes 2 to 3 days from start to finish.

These are the steps of a pool deck job, in the order we do them.

  1. Clean

    We clean the whole deck and grind it where needed, so the new coating has a sound surface to bond to.

  2. Repair cracks

    We repair the minor cracks, patch chipped spots and remove any loose old coating before anything new goes on.

  3. Coating

    We apply the new coating across the deck, a textured cool deck finish or a decorative overlay, whichever you chose.

  4. Cure

    The coating cures before the deck goes back into use, and we clean up when the work is done.

2 to 3 daysA cool deck coating, start to finish
Call for a Free Estimate

What it costs

Pool Deck Resurfacing Prices

A cool deck coating typically costs less per square foot than a stamped overlay, and your deck's size and condition set the total. Here in Albuquerque the typical range is $4 to $8 per sq ft, which comes to about $3,200 to $6,400 for an average-size deck.

Cool deck, per sq ft$4 to $8Typical range in Albuquerque
An average-size deck$3,200 to $6,400Typical range, cool deck coating

Those are typical ranges, not our quote. Cracks to repair, old coating to strip, the finish you choose and how easy the deck is to reach all move the price, so we look at the deck and quote the whole job before we start, with no surprise charges after.

A Cooler, Safer Deck Around the Pool

A cool deck coating reduces surface heat and adds slip resistance, the grip that bare or freshly sealed concrete lacks when wet.

Here is what the coating changes on the deck you walk across every day:

  • Cooler underfoot. The polymer cement overlay reduces the heat a deck soaks up in full sun.
  • Grip when wet. Its texture adds slip resistance right where wet feet and splashed water land.
  • No slick seal coat. Freshly sealed decorative concrete can be slick when wet; a cool deck top is made to be walked on wet.

When a Pool Deck Needs Leveling or Replacement

Minor cracks can be repaired before the deck is resurfaced, but major structural damage may need removal and replacement first. A deck that has sunk or broken into separate sections is past what a coating can fix, and we tell you so at the estimate rather than coat over it.

Pool Decks Across the Albuquerque Area

We resurface pool decks across Albuquerque and the nearby towns on our service area page, from the North Valley and Los Ranchos down to the South Valley and up to Bernalillo.

concrete repair service area around Albuquerque

Reviews

In a Customer's Own Words

A review from our Google profile, word for word, as the customer wrote it.

Google review
Service was excellent.Great quality concrete.Locally owned and located in Bernalillo NM. Fast and friendly service.Very satisfied with the whole service team.Thank you !!!
Jess VGoogle review
Free, no-obligation estimates

Ask about your deck.

Call and we come look at the pool deck, tell you whether it is a coating job, and quote the whole thing before we start.

Call for a Free Estimate

Open Monday to Friday, early morning to mid-afternoon. Calls outside those hours go to voicemail and we return them the next working morning.

FAQ

Pool Deck Answers

The questions pool owners ask us most about recoating a concrete deck. If yours is not here, call and ask it.

(505) 520-1760

How much does it cost to resurface a pool deck?

In Albuquerque a cool deck coating typically runs $4 to $8 per square foot, about $3,200 to $6,400 for an average-size deck. A stamped overlay costs more per square foot, and the deck's size and condition set the total. We quote the whole job free before we start.

Can I resurface my pool deck myself?

The prep is most of the job: the deck has to be cleaned, ground where needed and patched, its cracks repaired and any loose coating removed before a new finish goes on. A cool deck coating then takes 2 to 3 days from start to finish. If you would rather hand it off, the estimate is free.

What is the best material to use for resurfacing a pool deck?

For a deck people walk on barefoot and wet, we start with a cool deck coating: "Kool Deck" is a polymer cement overlay that reduces heat and adds slip resistance. If a decorative pattern matters more to you than the price, a stamped overlay gives you one.

Can a concrete pool deck be resurfaced?

Yes. Resurfacing suits pool decks as well as driveways, patios and garage floors. Minor cracks are repaired first; major structural damage may need removal and replacement before any coating goes on.

Ready for a Cooler Pool Deck?

Free, no-obligation estimates on pool deck resurfacing in Albuquerque, NM.

We quote the whole job before we start, with no surprise charges after.

Call for a Free Estimate
Call today, we answer or call back the same day (505) 520-1760

Mon to Fri, early morning to mid-afternoon

We show up when we say we will, and we clean up when the work is done.

Call (505) 520-1760